Road Transport Kit
SSAA - Just the ticket for towing your lift to and from the water. Just add rubber to the wheels provided, attach the kit to the unit and your lift is roadworthy. The kit includes:
  • Two Spindle/Hub Assemblies - SS#50
  • Two 15" Rims - SS#51's
  • One set of attaching Brackets - SS#230A
  • One Tongue Assembly - SS#231A

For Models from 2000 - 7000 lbs.

On Water Transport Kit
HA0014 - The On Water Transport kit is designed to assist floating your hoist over open water to its destination if equipped with an adequate form of floatation. It adjusts to fit all aluminum lifts available.

Carrying Handles
SS#233A - Carrying Handles make carrying a lift into position just a little bit easier for you and three friends.

For Models with capacities from 2000 to 6000 lbs.

Electric Drive
SSDC2, 12V and SSAC2, 110V Electric Drives - With an electric drive, all it takes is a flip of a lever and throw of a switch before your lift will be raised safely into storage position.

SSDC2 (12V) runs on rechargeable power from your boat or remote 12V source.

SSAC2 (110V) powers your lift with AC power from the shore. Both can be manually engaged and disengaged for hand operation.

For Models from 2000 to 6000 lbs.

Extension Legs
SSKA - Extension legs are to be used on 2000 lb. to 4000 lb. lifs for deep water applications.

SSKA-55 - Extension legs for lifts 5000 to 7000 lbs.

Front End Boat Stop
The aluminum boat stop with large foam cushion for extra protection.
HA1180 - for 1500 to 4000 lb. lifts; HA1242 - for 3000 and 9000 lb. lifts.

Centering Guides
Carpeted centering guides are especially helpful in rough waters.

HA0011 - For 1500 to 4000 lb. lifts.
HA0012 - For 5000 lb. and 6000 lb. lifts and for the 4000 lb. and 6000 lb hydraulic lifts.

Pontoon Conversion Kit
SSPV - Converts your SSV30108, SSV40108 or SSV40120 lift to a center-lift pontoon lift. All the necessary hardware provided, all you do is buy the wood locally.

Canopy
The vinyl-coated nylon fabric canopy feature the new innovative SpoolSnap attaching system and a longer valance for added protection. Canopy is available in a variety of colors. See color chart.

Guides & Bumpers
SSHA and SSN-36 - The SSHA consists of two cradle brackets mounted on the crossmember that self-align with the boat on them, keeping it from tilting right or left. The SSN-36 are the white polystyrene foam uprights that act as bumpers when loading or launching your boat keeping it centered for a smooth landing or a clean getaway.

For Models SS36110

Roll-In Roll-Out
HA0017/HA0018 - Elevating Arm and Spindle Mounting Kits for roll-in boat lift applications. Use in conjunction with 3510593 wheels.