Frequently Asked Questions
Here are answers to some common questions about our product. If you can't find the answer to your question here, see our frequently asked questions for ShoreStation owners.
This depends on the model number. The first 2 numbers are the capacity in hundreds of pounds.
This depends on the model number. The last 3 numbers are the inches between the posts of entry, prior to the installation of optional load guides.
Left front or right rear on aluminum and right front or left rear on steel.
Approximately 12"-14" plus the draft of the boat.
The standard hoist leg can be used in up to 4 ft. The extension leg can be used in up to 6 ft. of water. The deepwater hoist models can be used in up to 9 ft. of water.
The threads of the winch drive shaft, winch cable, and drive chain.
It can be done but, but it is not cost effective.
When cables start to fray, they should be replaced.
With some guidance, they can be replaced.
Yes, by following the assembly manual.
Yes, it can be adjusted up or down to the corresponding numbers on both ends of the tube. This will limit the lifting height
See Dock Warranty.
See Dock Warranty.
We recommend a muck pad, which is available through your ShoreStation dealer.
ShoreStation uses Diamond Vogel #AG8319 – "Transparent Natural Cedar."
It is ShoreStation Part #4040132.